MTP/MPO Fiber Solution

It is possible to run a singel cable that automatically terminates 12 fibers in one easy plug in. With MTP/MPO system you can install a 12 strand fiber optic cable from your main distribution location to a sub distrubution location. The installation has never been easier!
For more products, please visit http://www.optoroute.com.cn/

Some Tips You Should Know:

The MTP connector is a high performance MPO connector engineered for better mechanical and optical performance.

The MPO Connector is the industry acronym for "Multi-fiber Push On", with push-on insertion release mechanism, provides consistent and repeatable interconnections and available with 4, 8, 12, or 24 fibers. The MTP/MPOis a connector manufactured specifically for a multifiber ribbon cable. The MTP/MPO single-mode connectors have an angled ferrule allowing for minimal back reflection, whereas the multimode connector ferrule is commonly flat. The ribbon cable is flat and appropriately named due to its flat ribbon-like structure, which houses fibers side by side in a jacket.

Advantages Of MTP Connector：

1 . The MTP connector housing is removable. This feature allows the customer to: 

     Re-work and re-polish the MT ferrule

     Change the gender after assembly or even in the field

     Scan the ferrule interferometrically after assembly

2. The MTP connector offers ferrule float to improve mechanical performance. This allows two mated ferruled to maintain physical contact while under an applied load.
3. The MTP connector uses tightly held tolerance stainless steel guide pin tips with an elliptical shape. The elliptical shaped guide pin tips improves guidance and reduces guide hole wear.
4. The MTP connector has a metal pin clamp with features for centering the push spring. This feature: 

    Eliminates lost pins

    Centers spring force

    Eliminates fiber damage from spring

5. The MTP connector spring design maximizes ribbon clearance for twelve fiber and multifiber ribbon applications to prevent fiber damage.
6. The MTP connector is offered with four standard variations of strain relief boots to meet a wide array of applications.

    Round, Loose Fiber Cable Constructions

    Oval Jacketed Cable

    Bare Ribbon Fiber
    Short boot which reduces the footprint by 45%. Ideal for use in space limited applications.
 

Performance of Assemblies MTP/MPOTermination:

 

Type/Performance Singlemode(APC polish) Multimode(PC / Flat Polish) Standard Elite Low Loss Standard Elite Low Loss Maximum Insertion Loss ≤ 0.75dB ≤ 0.35dB ≤ 0.60dB ≤ 0.35dB Return Loss ≥ 50dB N/A Operating Temperature -40°C to 80°C 40°C to 80°C Test Wavelength 1310nm 850nm

The MTP/MPOSystem Is Ideal For Many Applications Including:

Disaster Recovery

Backbones

Building Fiber Optic Distribution

Quick setup of new wiring hubs

Warehouses

 

The MTP/MPO system is a truly innovative and amazing group of products that really takes fiber optics into the new millennium. 

Our MTP/MPO Pre-terminated  High Density Multi-Fiber Cable Solutions:

*MTP/MPO Cable Assemblies

*MPO / MTP standard trunk cable

*MPO / MTP hybrid trunk cabble

*MPO / MTP harness cable 

*Easy plug and play cassette module

MTP/MPO Cable Assemblies	MTP/MPOStandard Trunk Cables
With its higher port density, MTP fiber is easier to install Multimode 10Gb OM3/OM4	24 Fiber, 48 Fiber, 72 fiber and 144 Fiber Opitc Trunk Cables, Singlemode, just pull 1 cable with 12 fibers for one easy plug-in.

Fanout/Breakout Cables Assemblies

>>MTP/MPOHybrid Trunk Cabble
 

• For fanout the fibers from MPO/MTP connectorsinto individual simplex or duplex connector
• To install directly into system equipment ports or patch panels
• MPO/MTP on one end, with single-fiber connectors on another end
• Fiber counts available in 12 / 24 / 36 / 48 / 72 /96 / 144-fibers• Single-fiber connector interface available in SC, ST, LC, MTRJ in forms of Simplex or Duplexchanneling
• Customized furcation length to cater for differentinstallation situations
• Ruggedized furcation legs: Round fanout kit with 2.0 mm or 3.0 mm legs to single-fiber connectors

 

>>MTP/MPO Harness Cable

 

• For transition from trunk backbone assemblies to fiber rack system
• MPO/MTP on one end, with single-fiber connectors on another end
• MPO/MTP connector in 8 or 12-fiber interface forchoices
• Fiber counts available in 8 / 12-fibers
• Single-fiber connector interface available in FC, SC, ST, LC, MTRJ, E2000 in forms of
Simplex or Duplex channeling
• Customized furcation length to cater for differentinstallation situations
• Ruggedized furcation legs: Round fanout kit with 2.0 mm or 3.0 mm legs to single-fiber connectors

 

MTP/MPO Fiber Optic Plug-N-Play Cassettes

 

Awide range of single mode and multimode MPO MTP Cassettes. The standard cassettes can accommodate 12 and 24 port configurations.
Different sizes of cassettes are available. Available in all fibermodes and connector options.

 

Some Other Special MTP/MPO Products Also Can Be Customized Such As：

MTP/MPO Direct Harness Cable Assemblies

 

• For direct connection for fiber rack systems or to equipment

• MPO / MTP on one end, with direct fanout by using zipcord cable or 3mm tubing to Single-fiber connectors

• No transition kit or breakout unit is require to help streamline cost and minimize space require

• MPO / MTP in 12-fiber interface in Male or Female

• Single-fiber connector interface available in FC, SC, ST, LC, E2000, MTRJ in forms of Simplex or Duplex channelling

• Customized furcation length to cater for different installation needs

• Ruggedized direct fanout: MPO / MTP direct assembly with 1.6mm zipcord ruggedized cable, to single-fiber connectors

• Corning fiber available for selection

MTP/MPO Hydra Cable Assemblies

                                                

•For installing inside plug-&-play fiber cassette module

•MTP/MPO Male (with guidepins) and Female (without guidepins) assembled with 0.9mm cable to single-fiber connectors

•All types of single-fiber connector interface available for choices (FC, SC, ST, LC, E2000, MTRJ, etc.)

•Available in SM (9/125), MM (50 or 62.5/125), 10Gig fiber types

•Available in 8/12/24 -fiber

•Corning fiber available for selection

MTP MPO Fiber Optic Cassette Rack Mount Holders

MTP/MPO 1RU horizontal rack mount cassette holder is manufactured with the following features:

 

Holds 3 LGX Cassettes for 12 or 24 fiber MTP Cassettes.

Multiple internal mounting holes for cable tie-down, fiber management Rack mounting.

Available in 1RU, 2RU, 3RU, and 4RU Configurations,  height 19” mount converts to 23” frame

Hinged front doors, screw down top

MTP/MPO Adapters	MTP MPO Fiber Optic Loopback Tester cable assemblies
MTP Adapters with a wide variety of options including Color and Dust Caps.	MPO MTP loopbacks in standard configurations such as for QSFP modules for a QSFP MTP loopback tester. Custom MPO MTP loopbacks are also available for any configuration .